Product ID:Z-GRIP LIGHTWEIGHT BODY FILLER, 282
MSDS Date:02/15/1996
FSC:8030
NIIN:00N085225
MSDS Number: CHBGR

FIBRE GLASS-EVERCOAT CO INC

6600 CORNELL RD
CINCINNATI, OH 45242
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 519-489-7600

Cage: 18731

FIBRE GLASS-EVERCOAT CO INC

CINCINNATI, OH 45242 US

Telephone: 513-489-7600

Cage: 18731

4.50

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: 15-20%

OSHA PEL 100 PPM

ACGIH TLV: S, 50 PPM/100 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 40-45%

OSHA PEL 0.2 FIBERS/CC

ACGIH TLV: 0.2 FIBER/CC, A1

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 5-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: CONT W/LIQ OR VAP MAY
RESULT IN IRRIT, REDNESS, TEARING AND BLURRED VISION. SKIN: CONT
W/MATL MAY RESULT IN IRRIT OF SKIN AND POSSIBLE DERMATITIS.
INHALATION: EXCESSIVE INHALATION OF VAPO RS MAY CAUSE NASAL &
RESPIRATORY IRRIT,ACUTE NERVOUS SYSTEM DEPRESS, FATG, WEAKNESS,
NAUS, HEADACHE, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:STYRENE: IARC MONO, SUPP, VOL 60, PG
233, 1994: GROUP 2B.
Effects of Overexposure:HLTH HAZ: AND DIZZINESS. INGEST: MAY CAUSE
GASTROINTESTINAL IRRIT, NAUS, DIARR, & VOMIT. ASPIR OF MATL INTO
LUNGS DUE TO VOMIT MAY PRDCE CHEM PNEUM WHICH CAN BE FATAL.
CHRONIC: EXCESSIVE OVEREXP TO ST YRENE HAS BEEN FOUND TO CAUSE
FOLLOWINGEFTS IN LAB ANIMALS: LIVER ABNORMALITIES, KIDNEY DAMAGE
AND LUNG DAMAGE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH IMMED W/LG AMTS OF WATER FOR @ LST 15 MINS. SEE
PHYS FOR MED TREATMENT. SKIN: IMMED WASH AREA W/SOAP & WATER.
REMOVE CONTAMD CLTHG. CONSULT PHYS IF IRRIT DEVELOPS. INHAL: REMOVE
TO FRESH A IR. RESTORE BREATHING. KEEP PERSON WARM& QUIET. TREAT
SYMPTOMATICALLY. GET MED ATTN. INGEST: KEEP PERSON WARM & QUIET.
CONSULT PHYS OR POISON CONTROL CENTER IMMEDIATELY.

Flash Point:97.0F,36.1C
Lower Limits:1.1%
Extinguishing Media:FOAM, CARBON DIOXIDE, AND DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . WATER MAY BE USED TO COOL CONTAINERS TO PVNT PRESS
BUILD-UP WHICH MAY RUPTURE CONTAINERS.
Unusual Fire/Explosion Hazard:VAPORS ARE HEAVIER THAN AIR AND MAY
TRAVEL ALONG THE FLOOR AND BE IGNITED BY SPARKS OR FLAMES AT A
DISTANCE WHERE THE MATERIAL IS BEING USED.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE
AREA. WEAR PROTECTIVE EQUIPMENT. AVOID BREATHING VAPORS. CONTAIN
SPILL. COLLECT WITH INERT ABSORBENT AND REMOVE. DISPOSE OF
PROPERLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE MATL IN A COOL, WELL-VENTILATED
AREA. DO NOT STORE AT TEMPS >75F. DO NOT USE/STORE NEAR HEAT,
SPARKS/OPEN FLAME. KEEP CNTNRS TIGHTLY CLOSED.
Other Precautions:AVOID CONT W/INCOMPAT MATLS. THIS PROD MUST BE MIXED
W/CATALYST PRIOR TO USE. PLEASE REFER TO MSDS FOR CATALYST BEFORE
USING. IF PROD IS TO BE ABRADED, PEL/TLV OF 10 MG/M3 FOR NUISANCE
DUSTS SHOULD BE OBSERVED. KEEP OUT OF REACH OF (SUPDAT)

Respiratory Protection:USE NIOSH APPROVED RESPIRATORS DESIGNED TO
REMOVE PARTICULATE MATTER & ORGANIC SOLVENT VAPORS.
Ventilation:GEN DILUTION/LOC EXHAUST VENT SHOULD BE PROVIDED TO KEEP
EXPOS BELOW ACCEPTABLE LIMITS & TO KEEP SOLV VAPS BELOW(SUPDAT)
Protective Gloves:NEOPRENE OR NATURAL RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
IMPERMEABLE CLOTHING.
Work Hygienic Practices:ALWAYS WASH HANDS AFTER USING THIS MATERIAL,
AND BEFORE EATING, DRINKING OR SMOKING.
Supplemental Safety and Health
WASTE DISP METH: HAZARD INFO IN OTHER SECTIONS OF THIS SHEET. OTHER
PREC: CHILDREN. DO NOT TAKE INTERNALLY. AVOID CONTACT WITH EYES &
SKIN. VENT: LOWER EXPLOSION LIMIT.

Boiling Pt:B.P. Text:203F,95C
Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:1.20
Evaporation Rate & Reference:SLOWER THAN ETHYL ETHER
Solubility in Water:NOT KNOWN
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
PEROXIDES, STRONG OXIDIZERS, STRONG MINERAL ACIDS AND POLYMERIZATION
CATALYSTS.
Stability Condition to Avoid:HIGH TEMPERATURES, IGNITION SOURCES, AND
CONTACT WITH INCOMPATIBLE MATERIALS.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE, & LOCAL REGS.
WASTE FROM PROD MAY BE HAZ AS DEFINED UNDER RCRA 40 CFR 261. WASTE
MUST BE TESTED FOR IGNITABILITY TO DETERM APPLIC EPA HAZ WASTE
NUMBERS. BEFORE ATTEMPT ING CLEAN-UP/DISPOSING OF MATL, REFER TO
(SUPDAT)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.